Implementation of the Distribution Requirement Planning Method in Optimizing the Distribution of Packaged Drinking Water Products


Implementasi Metode Distribution Requirement Planning Dalam Pengoptimalan Pendistribusian Produk Air Minum Dalam Kemasan


  • (1) * Nurlaila Handayani            Universitas Muhammadiyah Sidoarjo  
            Indonesia

  • (2)  Yusri Nadya            Universitas Samudra  
            Indonesia

  • (3)  Dwi Maulana            Universitas Samudra  
            Indonesia

    (*) Corresponding Author

Abstract

CV Athaya Mineral is an industry that runs its business in the production and distribution of bottled drinking water. At the time of distribution of its products, errors often occur, namely the interpretation of demand data in each distribution chain and information received. The purpose of this study was to determine the optimal lotting technique for the distribution of these products using the Distribution Requirement Planning (DRP) method. From the results of data processing, the retail value of Kede Osa was obtained with a total cost of Rp. 233.696, New Store retail with an amount of Rp. 417,336, retail Ari JP Rp. 99,727, Simpang Remi retail Rp. 165,140, retail Mita Jaya Rp. 619,981. The conclusion of this study is the distribution of the Distribution Requirement Planning method for all Dance products (Glass, Small Bottles, Medium Bottles, and Gallons) to five retailers (Kede Osa, Toko Baru, Ari JP, Simpang Remi, and Mita Jaya) using Economic Order Quantity (EOQ) is a lotting technique with the cheapest distribution costs, except for New Store retailers using the Lot For Lot (LFL) lotting technique.

References

M. Hakimah, R. R. Muhima, and A. Yustina, “Rancang Bangun Aplikasi Persediaan Barang dengan Metode Trend Projection,” SimanteC, vol. 5, no. 1, pp. 37–48, 2015, [Online]. Available: http://neo-bis.trunojoyo.ac.id/simantec/article/download/1023/899.

v Gasper, “Production Planning And Inventory Control. Berdasarkan Pendekatan Sistem Terintegrasi MRP II & JIT menuju Manufacturing 21.” 2012.

S. Kasus, B. Terang, G. Gedangan, and D. Oleh, “Distribution requirement planning (drp),” vol. 3, no. 2, pp. 1–22, 2010.

“Penerbit Guna Widya Supply Chain Management.pdf.” .

J. T. Industri, F. Teknik, and U. M. Malang, “Pengurangan Bullwhip Effect Dengan Metode,” vol. 14, no. 2, pp. 292–298, 2015.

M. Agustina and F. Oktasari, “Penerapan Metode DRP( Distribusi Requirement Planning ) Pada Sistem Informasi Distribusi LPG ( Studi Kasus : PT Bumi Sriwijaya Palembang ),” Semin. Nas. Inform., vol. 2012, no. semnasIF, pp. 76–81, 2012.

F. Munawaroh and W. F. Mahmudy, “kesinambungan kegiatan Distributor memasarkan produk ke berbagai daerah sehingga pemasaran produk menjadi luas . Semakin luas daerah pemasaran produk , maka produk tersebut akan semakin dikenal dan membawa keuntungan yang beasar bagi perusahaan sehingga k,” J. Environ. Eng. Sustain. Technol., vol. 02, no. 02, pp. 89–96, 2015.

D. N. B. Sembiring, A. Y. Ridwan, and R. Aurachman, “Usulan Perencanaan Dan Pengendalian Aktivitas Distribusi Pulp Di PT XYZ Untuk Meningkatkan Kemampuan Pemenuhan Permintaan Setiap Distribution Center (DC) Menggunakan Metode Distribution Requirement Planning (DRP),” eProceedings Eng., vol. 4, no. 3, pp. 4426–4435, 2017.

M. I. Mustofa and F. N. Hakim, “Rule Based Dan Safety Stock Utuk Monitoring,” pp. 27–31, 2018.

Tri Susilo, “Analisa Bullwhip Effect pada Supply Chain (studi kasus pada pt . Istana Cipta Sembada Sidoarjo),” J. Penelit. Ilmu Tek., vol. 8, no. 2, pp. 64–73, 2008.

E. W. A. Belo, Armandina Maria, Joko Susetyo, “Jurnal Rekavasi,” J. REKAVASI, vol. 4, no. 2, pp. 60–118, 2016.

R. A. Mahaji Puteri and M. Prasetyawati, “Analisa Penyebab Kegagalan Kemasan Cup Minuman Instan Aloe Vera,” Pros. Semin. Nas. Teknoka, vol. 3, no. 2502, p. 27, 2019, doi: 10.22236/teknoka.v3i0.2909.

S. Wardah and Iskandar, “KEMASAN BUNGKUS ( Studi Kasus : Home Industry Arwana Food Tembilahan ),” J. Tek. Ind., vol. 9, no. 3, pp. 135–142, 2016.

A. Purwanto and S. Hanief, “Teknik Peramalan Dengan Double Exponential Smoothing Pada Distributor Gula,” J. Teknol. Inf. dan Komput., vol. 3, no. 1, pp. 362–366, 2017, doi: 10.36002/jutik.v3i1.238.

I. O. Countermeasures, “梁发超 1 , 刘诗苑 2 , 起晓星 ※ 3,” vol. 3, no. 0, pp. 377–388, 2017.

Picture in here are illustration from public domain image (License) or provided by the author, as part of their works
Published
2022-01-22
 
How to Cite
Handayani, N., Nadya, Y., & Maulana, D. (2022). Implementation of the Distribution Requirement Planning Method in Optimizing the Distribution of Packaged Drinking Water Products. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 5(2), 75-85. https://doi.org/10.21070/prozima.v5i2.1531
Section
Articles