The design of the Coconut Peeling and Splitting Machine using TRIZ Method

Perancangan Mesin Pengupas dan Pembelah Kelapa dengan Menggunakan Metode TRIZ

Authors

  • Yohanes Patrik Adventus Banda Universitas Katolik Widya Mandala Surabaya
  • Julius Mulyono Universitas Katolik Widya Mandala Surabaya
  • Hadi Santosa Universitas Katolik Widya Mandala Surabaya

DOI:

https://doi.org/10.21070/prozima.v5i2.1390

Keywords:

kopra, pengupasan, pembelahan, TRIZ, TRIZ Method, copra, stripping, splitting

Abstract

Copra is one of the most interesting materials, is a type of coconut which is dried using a heating process. Copra is commonly used as a part of material to produce cleanser, for the human body, such as soap and shampoo. There is a big opportunity for using copra, so we need to design an equipment for supporting copra production efficiently and faster. This research aim is to help the farmers, so they can meet market needs which are increasing day by day. Copra processing still uses traditional production methods. This study aims to design a coconut stripping and splitting device using the TRIZ method. Doing a simple experiment, resulting shorter processing of coconut peeling and breaking, showed an average time of 39.65 seconds for each piece of coconut.

References

Rantanen, K; Domb, E. 2002. Simplified TRIZ New Problem-Solving Applications for Engineers and Manufacturing Professionals. ST. Lucie Press: New York.Mulyono, Julius; Angka, Peter R., (2011),

Aplikasi Teknologi dalam Kehidupan Sehari-Hari, Prosiding Seminar Nasional Teknik Industri dan Kongres Badan Kerja Sama Penyelenggara Pendidikan Tinggi Teknik Industri (BKSTI) VI ISBN 978-602-9997-0-5, Oktober 2011.

Purnomo, Hari; Janari, Dian, (2015), Rancang Bangun Mesin Pengupas, Penghancur dan Pengayak Sabut Kelapa, Jurnal Spektrum Industri, Vol. 13, No. 1 ISSN : 2442-2630.

Manongko, Jenly D. I; Rampo, Johanis (2016) Rancang Bangun Model Mesin Pengupas Kelapa Untuk Petani Kelapa Di Desa Wiau Kabupaten Minahasa Tenggara Propinsi Sulawesi Utara, Prosiding Semnastek 2016 ISSN 2407-1846.

Abdullah, Haris; Botutihe, Sjahril; Djamalu, Yunita (2016), Pembuatan Alat Pengupas Sabut Kelapa Muda Sistem Putar, Jurnal

Downloads

Published

2022-02-01

How to Cite

Banda, Y. P. A., Mulyono, J. ., & Santosa , H. . (2022). The design of the Coconut Peeling and Splitting Machine using TRIZ Method: Perancangan Mesin Pengupas dan Pembelah Kelapa dengan Menggunakan Metode TRIZ. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 5(2), 86–92. https://doi.org/10.21070/prozima.v5i2.1390

Issue

Section

Articles